Incl Timing Assy Res. The Safety Beam Kit provides additional safety by preventing the door closing when the beam is blocked by a car, child etc. After aligning the safety beams , refer to the openers manual to set the travel limits. If Opener already installe install the safety beams then run the door for cycles for the opener to update details.
Repeat step (a) to insert batteries into the Transmitter (WPB-TX). The LED on the transmitter will light up and after. GST or payments of $37. Instruction Manual. Alternative Power Options.
MegaCode Four Channel Receiver. Wireless Safety Beams. Single Dual Channel Receivers. CB-Control Board. A photo electric beam fitted correctly can protect your vehicle, your property and your family.
The red LED will flash five times on power-up, to indicate the unit is powering up correctly. In Normal Mode of Operation,. When used with an AUTO CLOSE feature on ATA control boards and operators, PE-will prevent a. In most countries, PE Beams are mandatory on all gates fi tted with automatic openers. For a small additional outlay, Automatic Technology recommends that Photo Electric Beams be installed with the automatic opener ensuring additional safety and peace of mind.
The photoelectric safety beam input can be programmed to prevent the motors being driven in the open or close directions. The controller can be programmed to automatically close the gate after it has been opene partly opened for pedestrian access or after the photoelectric safety input has been triggered and then released. Note that if using a reflector type, it may be best to mount the reflector last. Ratings and reviews. How to install infrared safety beams for gate or garage (Centurion Itype).
Beam if this mode is selecte otherwise the door may cause personal injury or damage to property. PHOTO ELECTRIC BEAM (OPTIONAL) The opener has an input for a photo electric beam to be connected for extra safety protection and use of the auto close mode. MANUAL OPERATION The opener is equipped with a unique manual disengaging device. N1- ATA PE-Beam Wiring Applications 1. See manual for phase change. The iinfrared beams are designed to provide optimum safety by detecting the presence of a person or vehicle traversing the path of a moving gate or door.
The beams can be interfaced with most automation equipment. The safety beams must be installed in such a way that the product is prevented from running when anything is in the path of the door or gate. Over and above the recommenda on to use safety infra-red beams with this product it is mandatory to install and use a safety beam set when using the automa c closing feature. It is recommended that a. As soon as a person or object moves through the invisible safety beam , the door will stop or auto reverse to avert serious damage being done. Safety has never been so quick and easy – thanks to wireless technology!
Introducing CENTSYS’ Photon II infrared gate safety PE beams with a wireless transmitter. Photon II makes short work of achieving a safe automation system for even the most challenging of installations. Protects your children, pets and vehicles by sensing if they are in the doorway, and stops the garage door from coming down on them.
Locking the Control Panel 8. Centurion Systems manufactures a diverse and award-winning range of products to control the access of people and vehicles into and out of residential, commercial and industrial properties.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.